Biomed 7E-G1 medical suction unit

Biomed 7E-G1 supports three power sources: AC mains, an external DC supply and an internal Li-Ion battery. A regulator and vacuum gauge are on the front panel; battery-status indication and a low-charge warning are listed. Do not assume H1 provides G1’s three power options; battery operation is not listed on the H1 card.

formed.ua specifies maximum vacuum of 85 ± 5 kPa, adjustment from 20 kPa to maximum, and flow of 27 ± 4 L/min. The collection container holds 1000 ml. These values support technical comparison; a trained professional determines clinical settings and permitted use according to the manual.

Battery operation is listed as 60 minutes when fully charged, with four hours for charging. Load and battery condition matter, so this is not guaranteed in every mode. Mains consumption is 150 VA; external DC input is 12 V, 5 A. Verify connector and source compatibility rather than assuming a universal vehicle connection.

The listed set includes container with lid, tubing and filter, a 2 m tube, two extra filters, F8 and F12 catheters, mains and DC cables, and manual. Dimensions are 480 × 189 × 285 mm and net weight 4 kg. Agree consumables, cleaning and duty cycle; conformity documents and FORMED VIP stock need separate confirmation.

Source for the expanded description: formed.ua ↗